Reflex CES Stratix 10 SoC Modules

High performance SoM Accelerates Product Development

Reflex CES Stratix® 10 SoC modules are based on Intel Stratix® 10 FPGA. Stratix® 10 is one of the latest FPGA families delivering the most performance developed by Intel®. System-on-Modules are small and integrated single-board computers. These SoMs can be used in many embedded applications.

FPGAs (Field Programmable Gate Array) are used to offer a high capacity of logic and memory storage, while keeping a module size suitable for embedded solutions.

 

The COMXpress Stratix® 10 SoC System-on-Module (SoM) is the industry’s first Intel® Stratix® 10 SX SoM available in a standard COM Express 3.0 Basic form factor, Type 7 module. This high performance SoM incorporates the highest density Stratix® 10 SX FPGA for processing huge/complex data algorithms in four separate DDR4 memory channels. Using this SoM obviates FPGA design complexity which enables the engineering team to focus on the higher value aspects of the product thereby reducing both development time and resources.

Video

Main features:

  • Stratix® 10 2800KLE FPGA with an integrated 1.5GHz quad-core 64-bit ARM Cortex-A53 processor
  • 56Gbytes of 72-bit ECC DDR4 in four memory channels, 32Gbytes of eMMC flash storage
  • On-board power regulators and power management
  • On-board USB Blaster J-Tag program/debug interface
  • PCIe Carrier high-speed Interfaces:  QSFP+, PCIe 3.0, SATA3, Mini SAS, USB3, USB2, GigE

Target Applications:

  • Medical Instrumentation and Imaging
  • HPC and Data Analytics
  • Test and Measurement
  • Machine and Industrial Vision
  • Video Broadcast and Video Processing

Tech specs for the COMXpress Stratix® 10 SoC

FPGA and Configuration Modules

  • Stratix® 10 SX with ARMV8 (Integrated quad-core 64 bit ARM CortexA53 hard processor system up to 1.5 GHz embedded)
  • MAX10 CPLD with board management control
  • JTAG connector for external USB cable
  • eMMC 32GBytes (HPS) / with U-boot, Linux kernel & Rootfs
  • NOR Flash for quad SPI (x4) FPGA configuration mode

Memory

  • 4x memory banks on board DDR4:
    • Total 56GB + ECC

Communication Interfaces

  • Ethernet 10/100/1000 Base-T (HPS)
  • 4x 10GbE base KR (default)
  • 2x Serial SATA revision 3.0, 6Gb/s
  • 4x XCVR lane connected to extension connector (DisplayPort/SDI capable)
  • 3x USB2.0 HOST
  • 1x USB3.0
  • 1x SMB,I²C,UART
  • 8 GPIOs (4 FPGA + 4 HPS)
  • 2x PCI Express x16 (Gen 1, 2 or 3), end-point supported
  • eSPI interface multiplexed over Intel Low Pin Count (LPC) Interface
  • Network Controller Sideband Interface (NC-SI) supported (and optional)

Other resources

  • Extension connector : Interfaces (4x transceivers Rx/Tx and 4xLVDS interface)
  • Programmable PLL (Si5341), output clocks frequency 0.0001MHz to 750MHz
  • High precision on board oscillator, clock accuracy 20MHz-0.05ppm for Precision Time Protocol (PTP) IEEE 1588

Power

  • +12V primary power supply input, 120W max
  • +5V standby and 3.3V RTC power supply inputs

Operating Range : 0°C to 40°C

Storage temperature Range : 0°C to 70°C

Board Dimensions

  • Length : 125mm (4.92inches)
  • Width : 95mm (3.74 inches)
  • Height (without heatsink) :
    • 11.91mm (with 5mm Standoffs)
    • 14.91mm (with 8mm Standoffs)

Standards and compliance

  • RoHS/REACH compliant
  • UL certified
  • ISO9001 Facility

Tech specs for the COMXpress PCIe Carrier Board

Configuration and Monitoring

  • 1x Micro USB (On board USB Blaster, UART over USB)

Communication Interfaces

  • 1x Ethernet 10/100/1000 Base-T (HPS)
  • 1x QSFP+ Optrical link for 10/40GbE protocols
  • 2x Serial SATA revision 3.0, 6Gb/s
  • 2 x MiniSAS quad connector (1 HD SAS, 4 SATA HDD, NVMe interface capable)
  • 3x USB2.0 Type A (HPS)
  • 1x USB3.0 OTG Type A
  • SPI, SMB, I²C, UART and 8 GPIOs on header connectors
  • 1x PCI Express x16 (Gen 1, 2 or 3)
  • 1x eSPI interface multiplexed over Intel® Low Pin Count (LPC) Interface
  • 1x Network Controller Sideband Interface (NC-SI) for host communication
  • 1x RTC battery holder
  • 1x Coax connector for PPS (pulse per second)
  • PCIe evaluation board with PCIe bracket
  • Schematics
  • VHDL test designs (included top level)

Power supply

  • 8-pin ATX Power supply connector with Oring protection

Operating Temperature :  -0°C / + 40°C

Board dimensions : full length 254mm x 111.15mm

Compliance

  • Full compatible with COMXpressSX Stratix® 10 module
  • RoHS/REACH compliant
  • UL certified
  • ISO9001 Facility

Contact Us

For more information: