Get Hands-On with Altera Agilex™ 5: Develop Your Own SoC on the Macnica Sulfur Board!
Oct 01, 2024
Tulsa, Oklahoma
These in-person sessions give you a direct path to mastering the Altera Agilex 5 platform
From initial design to debugging FPGA components and memory, you will learn how to build a working SoC using the Macnica Sulfur Development Kit.
Taught by senior engineers from Macnica
This is your chance to level up on the next generation of ground-breaking high performance, power-efficient SoC FPGA technology.
This workshop is for:
- FPGA design engineers.
- Colleagues are welcome to pair up (software developers, architects).
Prerequisites
- Some experience with FPGA design tools
- Linux experience is not required to complete lab exercises
By the end of the workshop, you will have accomplished the following:
- Successfully built a working Agilex 5 SoC using the latest FGPA design techniques
- Gained experience with bootloader capabilities and commands to debug FPGA components and memory
- Worked through a bring-up of Linux for interaction with FPGA devices
- Experienced hands-on development with the advanced Macnica Sulfur kit
- Learned how to significantly reduce SoC design time for FPGA’s using Altera tools
Agenda
- Introduction, technical presentation, Macnica Sulfur demos
(1.5 hours) - Hands-on lab exercises
(3 hours) - Wrap-up and give-aways
(1/2 hour)
- Agenda may differ slightly between cities.
Lunch will be provided
Links
