The Altera HDMI 2.0 IP video display interface provides video transmit/receive functions of the HDMI 2.0 standard for Altera FPGAs. It has a maximum transfer rate of 18 Gbps enabling support for video up to RGB 24-bit 4K60p. Users can bring their Altera HDMI 2.0-compliant products to market very quickly and easily.

• HDMI 2.0 video transmit and receive with Altera FPGA
• Maximum transfer rate of 18 Gbps, supports RGB 24-bit 4K60p transmit and receive (Actual video format and frame rate depend on the FPGA device)
• HDMI operation confirmed by third-party compliance testing
• DVI mode
• Deep Color (30-bit / 36-bit / 48-bit) mode
• Display Data Channel (DDC)
• Control Data Channel (SCDC)
• Hot Plug Detect, +5V Power Drive
• Audio
• Content Protection is not supported.
• Consumer Electronics Control (CEC) and HDMI Ethernet and Audio Return Channel (HEAC) need to be provided outside the IP.

• Altera Cyclone® V GX*
• Altera Arria® V GX*
• Altera Arria® 10 GX
• Altera Stratix® V GX

* Video resolution is limited. Please contact us for further information.

Please view our office locations to contact a local Macnica sales representative, or use our contact form for information about other devices.

• Encrypted RTL (Verilog HDL)
• Reference design
• Simulation environment (For ModelSim)
• User manual, Reference manual, Simulation manual

*  The values in the above table are based on an example implementation. There may be some variation depending on the user’s system configuration.

* Mpression HDMI interface cards are also available for purchase. For more information, please contact your local Macnica sales representative.