The HiPrAcc™ CS200D is the highest performance PCIe Computational Storage accelerator card with dual Intel 10nm Agilex FPGAs. Only module with up to 32/64TB on-board NVMe storage coupled with high performance FPGA processing nodes and Gen4 PCIe switch interconnect.

• PCIe add-on card compliant to PCI-SIG, PCI Express Specifications Revision 4.0
• 3/4 length, full height, double-wide [Length 266.7mm, height 111.15mm, double-width 39mm (34.8mm primary, 2.67 secondary)]
• Two high performance Agilex F-Series 027 FPGA processing nodes with two P-Tiles and one E-Tile
• Support for up to eight on-board Gen4 M.2 NVMe SSDs
• PCIe Gen4 switch interconnect for the two FPGA nodes, 8x Gen4 M.2 NVMe SSDs and x16 Gen4 host PCIe edge connector
• 2 banks of 64-bit DDR4 memory 8GB/16GB) for each FPGA node
• Up to 300W card load with 75W from the PCIe edge connector and 225W from the auxiliary 8-pin CPU/GPU (EPS) connector
• Integrated USB Blaster II, Agilex debug and module monitor interfaces through a single micro-USB connector on PCIe bracket
• Extensive power, voltage and temperature telemetry with SMBus based access for host server board management controller (BMC)
• Optional Firefly interface for Networking interface

• The CS200D is designed for high performance computation and store acceleration workloads
• Machine learning, AI inference,
• Big Data Analytics, Database Acceleration

• Integrated USB BlasterII
• UART access to the FPGA and module control CPLD
• Temperature, voltage and current monitoring sensors to module control CPLD
• Module input power measurement for profiling and verification in target servers/environment
• Automatic over-temp FPGA de-configuration
  • Multiple on-board diagnostic and status LEDs