Product News

PWM Input Audio Amplifier for Use in Microcontroller-based Sound Systems The NA1150 is an audio switching driver IC that can be used as a PWM input audio amplifier in MCU-based sound systems. The combination with the CRI D-Amp Driver®, sound middleware of CRI Middleware Co., Ltd., provides high-quality sound reproduction.

Microchip Adds MTCH2120 to its Portfolio of Turnkey Capacitive Touch Controllers The touch controller is designed to integrate with a comprehensive ecosystem of tools to streamline development and speed time to market

Integrated and Compact CAN FD System Basis Chip Solution for Space-Constrained Applications Microchip introduces the ATA650x CAN FD SBC with integrated high-speed CAN transceiver and 5V LDO

Microchip Expands PolarFire® FPGA and SoC Solution Stacks with New Offerings for Medical Imaging and Smart Robotics Application-specific, integrated hardware and software technology stacks lower the barrier of entry and speed time to market

Expanded Single Pair Ethernet Portfolio with 100BASE-T1 and 1000BASE-T1 PHY Transceivers for Network Interoperability Microchip’s LAN887x PHYs offer extended reach up to 40m and are designed to be compliant with industry standards

Microchip Technology Introduces a New Core in the dsPIC® Digital Signal Controller Family to Enhance Precision and Execution of Real-Time Control dsPIC33A DSCs feature a 32-bit architecture with a double-precision floating-point unit and DSP engine for faster computation in time-critical applications

For 4K and 8K Satellite TV Tuners, Wideband LNA (Low Noise Amplifier) The NJG1188KG1 is the industry's first*1 broadband LNA to support a bandwidth from 950 MHz to 2 GHz for conventional Broadcasting Satellite (BS) and Communications Satellite (CS) services, and full bandwidth from 2 GHz to 3.2 GHz for 4K and 8K broadcasting satellite services (advanced BS and CS).

ASIX Unveils AX88179B: Instantly Experience Driverless USB Ethernet Connectivity

亞信電子與安勤科技攜手共創TSN技術新浪潮 亞信電子推出AXM57104 TSN開發平臺與AXM57104 4埠TSN PCIe千兆乙太網卡解決方案，提供包含TSN時效性網路軟體參考原始程式碼的開發套件，以加速客戶TSN產品設計開發時程。

TVS Protection Solution against Interface Failure due to VBUS Accidentally in Contact with CC and SBU USB-IF launched the Type-C standard in 2013. This transmission interface became an instant hot topic among consumers and in the industry as soon as it was launched. Type-C not only features compact size and insertion in either orientation, but also acts as an interface for both signal transmission and power supply. The PD 3.0 protocol supported by most mainstream equipment is capable of up to 20V and 5A. For signal transmission, Type-C is capable of up to USB4 40Gbps, and completely compatible with A/V transmission protocols, such as DP.

ESD/EOS Protection Solution for Industrial PC 2.5Gbps Network Port Construction-wise, an industrial PC is not much different from a typical desktop PC and both of them are running on X86-based CPUs (from Intel and AMD), except that the industrial PC is all about stability, compatibility and expandability. For this, an industrial PC does not require transmission at I/O port as fast as in a consumer PC. On the other hand, an industrial PC requires reliability, longevity and robustness to external interference, as it is usually used in an environment mush harsher than that of a consumer PC, such as factory, railway application and on board a ship. Therefore, a lot of attention is placed on the ESD/surge protection at I/O port to keep ESD/surge from causing I/O port malfunction.

Protection Solution for USB Power Delivery 3.1 The latest upgrade has arrived for USB PD 3.0 protocol. The new PD 3.1 protocol supports 48V voltage output, while the charging power improves to 240W. The USB-IF just released the USB PD 3.1 protocol standard, with updates of power delivery capability. As defined in the latest protocol, the maximum charging power remains at 100W for the standard power range, and 28V, 36V, and 48V are added to the extended power range. The corresponding current is 5 amperes, resulting in the maximum power output increasing from 100W to 240W, as show in Table 1 below.

ESD Solution for Vehicular Multimedia Unit Vehicular multimedia systems have been developed for years by an increasing number of technical manufacturers. For the protection against electrostatic discharge (ESD), many of these systems are equipped with ESD protectors to keep the I/O ports from destructive ESD energy. The multimedia system is subject to electrostatic interference when its I/O is exposed to excessive ESD energy. Without appropriate ESD protection, it is likely to see system damage or even I/O port malfunction. It is necessary to have good ESD protectors for vehicular multimedia system units.

Vehicle-Mounted OLED Display Module ESD/EOS Protection Solution OLED is an organic light-emitting diode, which is an organic electroluminescent device with a multi-layer structure. Compared with the conventional LCD (Liquid Crystal Display), which utilizes the principle of liquid crystal and backlight module imaging, the OLED display module uses its own power-on and self-illumination principle and structural design, making it lighter and thinner, high brightness, low power consumption, fast response, high definition, good flexibility, and high luminous efficiency, which can meet the new requirements of consumers for display technology.

ASIX Launches New EtherCAT Slave Controller with Dual-Core MCU Solution ASIX AX58400 EtherCAT Slave Controller with Dual-Core MCU is equipped with the highest-performing 480MHz ARM® Cortex®-M7 core, 240MHz ARM® Cortex®-M4 core, and EtherCAT Slave Controller integrated with two embedded Fast Ethernet PHYs.

ASIX launches AxRobot EtherCAT 7-Axis Force-Assisted Control Robot Solution

ASIX launches new Quad Port TSN Gigabit Ethernet PCIe NIC Solution

COVID-19: A Great EtherCAT Slave IC Solution for Smart Factory The COVID-19 pneumonia epidemic has brought a huge impact on the global manufacturing industry, but it has also given global manufacturers a new opportunity to accelerate the development of smart factory industrial automation applications.

亚信展出最新EtherCAT + IO-Link主站通讯协议堆叠解决方案 亚信电子即将于「2019 台北国际自动化工业大展」展示亚信最新的EtherCAT + IO-Link主站通讯协议堆叠解决方案

ASIX Launches New EtherCAT Slave Controller In response to the rapidly growing demand for Industry 4.0 market, ASIX Electronics Corp., a leading fabless semiconductor company for industrial/embedded networking/bridging solutions, today announces a new AX58100 2/3-port EtherCAT Slave Controller (ESC) which includes eight Fieldbus Memory Management Units (FMMUs), eight Sync Managers, 64-bit distributed clock and 8Kbytes Dual-Port RAM (DPRAM). The AX58100 integrates two embedded Fast Ethernet PHYs which can support both copper and fiber industrial Ethernet applications.